Product introduction:

XY dehydration tailing recovery all-in-one machine is a multifunctional dual-use product developed by our company on the basis of absorbing European and American technologies and actively embracing the development direction of green environmental protection in China. It can effectively reduce the loss of tailing, effectively solve the pollution of tailing to the environment, and meet the emission standards required by environmental protection. It has the characteristics of green environmental protection, energy conservation and emission reduction, and economy. In metallurgy, mining, water conservancy, hydropower, sand and gravel plants Glass plant, coal preparation plant, coarse coal recovery, environmental protection engineering, shield machine (mud purification) and other engineering projects are widely used.

Product features:

1. The recovery rate is more than 90% (multiple recovery and effective utilization)

The equipment adopts semi closed design. After the mortar is separated by the cyclone, the unrecycled sediment and wastewater will be discharged from the overflow port on the upper part of the cyclone. Flexible and reasonable waste discharge and multiple recycling, with a recovery rate of more than 90%. The cyclone is lined with polyurethane, which improves the service life of the whole device, and can successfully complete tailing concentration, liquid purification, etc.

2. Manufacturing process * (reliable and stable, long service life)

The exciting force of XY dehydration tailings recovery integrated machine is jointly completed by the eccentric shaft and the eccentric block rotating on the eccentric shaft. The vibration force is stronger, the operation is more stable, and the service life is longer. The machine adopts * manufacturing process. The screen body is integrally mounted on the gantry lithium iron bed to conduct iron surface and lithium hole on both sides, so as to ensure that the vibration exciter is assembled horizontally and concentrically. The bearing seat is made of special alloy steel, which avoids the problem of frequently replacing the bearing seat due to the high wear of the bearing seat made of ordinary materials due to the bearing running in the outer circle. It is characterized by wear resistance and deformation resistance.

3. Energy conservation and environmental protection (design, low power consumption and high efficiency)

When designing the XY dehydration tailing recovery integrated machine, the comprehensive matching of the motor, slurry pump and hydrocyclone has been fully considered, so that the equipment can give play to the production efficiency in the work, at the same time, the energy can be fully utilized, the power consumption in the equipment process is reduced, and the energy-saving production effect is achieved.

4. Fine sand and circular economy (greatly reduce the cost of wastewater treatment and turn waste into treasure)

XY dehydrated tailings recovery integrated machine can extract the fine sand (0.1-0.35mm) from the wastewater, so that the fine sand lost by the sand washer can be fully recycled and utilized, and at the same time, the fineness modulus of the sand can reach the best z grading, reducing the sediment content in the discharged wastewater, reducing the natural stacking time of tailings, slowing down the sedimentation in the sedimentation tank, and reducing the cleaning cost of the deep sedimentation tank, The mixture of recycled fine sand and sand and gravel after cleaning by sand washer can also improve the overall quality of sand and gravel, bringing huge benefits to sand and gravel enterprises.