Product advantages: fierce rough crushing, super bite force, low cost and high output
Product introduction
XY European jaw crusher is Xinyida's first choice for crushing hard materials after many improvements and optimizations based on in-depth study of crushing mechanism, integration of European and American * technology, and motion simulation using finite element analysis, dynamic analysis and other technologies. This product aims to achieve high output with low operating costs. Compared with similar domestic models, it has technical features and performance advantages such as design *, solid structure, high operation rate, high output, large crushing ratio, simple operation and maintenance, and convenient installation, which is more in line with the domestic market demand.
Note: The processing capacity of the equipment in the table will vary greatly depending on different data of physical properties of stone, feeding method, feed particle size, material water content and clay water content. The above data are for reference only. For specific application, please contact Sichuan Xinyida Machinery Co., Ltd.
Product features:
Robust structure (high fatigue strength)
XY European jaw crusher design *, which adopts pin bolt connection and hoe fixation, avoids stress concentration, greatly improves fatigue strength, and is more durable. At the same time, the overall modular design is compact, and each component can be quickly disassembled and combined, saving time and cost for transportation, installation and maintenance to a large extent.
Durable (heavy movable jaw assembly)
The movable jaw assembly of XY Oubanzhuan crusher is composed of heavy forged eccentric shaft, heavy duty rolling bearing with large size and high quality, and movable jaw body optimized by finite element analysis. A heavy guard plate is installed above the movable jaw to avoid damage to the jaw body and its internal bearing caused by material impact.
High output and crushing ratio (large eccentricity and long stroke)
The eccentric distance of XY European jaw crusher gradually increases from the top to the bottom, reaching a large value at the bottom. Combined with the steepened angle of the bracket, the eccentric shaft rotates for one cycle to obtain a longer linear stroke. The strong moving jaw movement and the long eccentric distance at the bottom of the crushing chamber enable the crusher to have stronger production capacity, higher crushing ratio and better product grading.
Super strong bite force (deep "V" crushing chamber)
XY European jaw crusher adopts deep "V" symmetrical crushing chamber design, so that the actual feed inlet width is consistent with the nominal feed inlet width. After repeated optimization, the depth of the feeding port enables the materials to enter the crushing chamber without hindrance, which has a good feeding capacity. The size of the meshing angle between the moving jaw and the fixed jaw plate liner is determined through the force analysis. The design of a reasonable meshing angle can not only increase the strong meshing force, but also reduce the wear of the jaw plate liner and reduce the cost.
Stable operation (integral bearing seat)
The integral cast steel bearing seat structure is perfectly matched with the frame, avoiding unnecessary radial load on the bearing caused by the combined bearing seat during fastening, and making the bearing run more smoothly.
Economical and efficient (jaw plate can be interchanged for 4 times)
Fixed jaw plate and movable jaw plate can be used interchangeably or reversely, and left and right side guard plates can be used interchangeably to achieve greater utilization of accessories, effectively reduce the number of user spare parts, and save a lot of long-term loss costs.
Safe and fast (convenient and fast granularity adjustment)
The special gear force amplifier structure of the mechanical discharge port adjusting device is used to cooperate with its double wedge adjustment mode, which is simpler, safer and faster than the gasket adjustment operation, and reduces the downtime.
