Product advantages: super energy medium and fine crushing, good technology, efficient production, strong transmission

Product introduction: Based on the introduction and absorption of advanced hydraulic cone crusher technology from Europe and the United States, the multi cylinder hydraulic cone crusher has been continuously optimized and designed to integrate the crushing speed, eccentricity, stroke, crushing force and crushing chamber type, so that it can achieve higher productivity and better product quality in the application of medium crushing, fine crushing and ultra-fine crushing. The cone crusher is characterized by firmness, reliability, strong production capacity, high degree of automation, simple operation and maintenance, good product grain shape, low long-term cost of vulnerable parts, etc. It is widely used in sand, mining, metallurgy, building materials and other industries, and can crush various hard stones and rocks.

Note: The processing capacity of the equipment in the table is affected by different data of physical properties of stone, feeding method, feed particle size, material water content and clay water content. The above data are for reference only, please contact Sichuan Xinbanda Machinery Co., Ltd. for specific application.

Product features:

Strong transmission and stable operation (high-strength precision casting and forging)

The multi cylinder hydraulic cone crusher is made of high-strength integral casting frame, the main shaft is made of high-strength alloy steel by precision casting and precision forging, and the transmission structure is made of high-precision bevel gears. The vibration of the equipment itself is small and the overall steel frame is supported with flexible support, so that the vibration transmitted from the equipment to the foundation is smaller, the foundation input is reduced, the overall structure is further optimized, and the strength is greater, which can effectively protect the frame and high-speed rotating balance ring of the equipment from wear during the working process, Low running noise, higher transmission efficiency, stronger bearing capacity, more stable transmission, and the general service life can be increased by more than 30%.

Greatly reduce the use cost (good laminated broken grain shape less consumption)

Conical crushing uses a special crushing chamber designed by the principle of inter particle lamination and its matching rotating speed to input more energy, replacing the traditional single particle crushing principle, so that material crushing not only occurs between particles and lining plates, but also occurs between particles. It significantly improves the proportion of fine materials and cube content of products, and greatly reduces needle and flake materials. Due to the change of crushing cavity and the protection of material layer during laminated crushing, the wearing parts are relatively less worn. The crushing wall and rolling mortar wall are made of high manganese materials, which further reduces their wear and greatly reduces the long-term operation cost.

High production efficiency (high swing frequency/large stroke)

The reasonable combination of high swing frequency of cone crusher and large eccentricity (stroke) of eccentric sleeve is selected, which greatly improves the passing capacity of this series of multi cylinder cone crusher. The hydraulic motor drives the adjusting sleeve (cone liner), which can accurately adjust the discharge port, and can be produced under the constant discharge port, avoiding the change of discharge port caused by the floating of single cylinder spindle during production.

Strong bearing capacity (improve the force on the main shaft/increase the installed power)

The equipment adopts a fixed spindle design, and the eccentric sleeve rotates around the spindle. The spindle does not move during operation, which greatly increases its strength, improves the force on the spindle, enhances the stability of the dynamic cone, and improves the life of the parts. The structure is more compact, and the weight of the equipment is significantly reduced compared with the traditional cone while obtaining greater installed power. The reinforced frame and cantilever high strength fixed shaft structure, the bronze sleeve dynamic pressure lubrication design, can provide greater load capacity in the crushing environment with large vibration and more dust.

Reliable sealing less shutdown (thin oil lubrication hydraulic cavity cleaning positive pressure dust prevention)

In the case of iron passing and instant idling, the two-way iron passing release hydraulic cylinder realizes automatic discharge, allowing the iron block to pass through the crushing chamber, avoiding the benefit loss caused by manual discharge when the machine needs to stop. The hydraulic cleaning of the crushing chamber has a large stroke, which is not related to the wear of the lining plate, and greatly reduces the workload required to manually remove the blocked materials in the crushing chamber. The XHP cone breaker adds a spherical floating seal on the basis of the T-U seal, uses a unique thin oil lubrication system, and cooperates with the positive pressure dust prevention system to make the seal more reliable. It eliminates common faults such as oil water mixing in the spring cone crusher, and effectively prevents dust from polluting the lubricating oil, Prolong the service life of lubricating oil and equipment parts.

Simple maintenance/operation (parts are easy to remove/liner plates are installed without packing)

All the parts can be disassembled and maintained from the top or side without disassembling the frame and fastening the bolts. The advanced lining plate fixing technology improves the reliability of the lining plate. The tapered lining plate back wedge is matched with the spiral bevel on the upper part of the tapered lining plate to form a self-locking; The moving cone liner is fastened with self-locking locking bolts. The liner plate installation does not require packing. The hydraulic motor can also rotate the adjusting sleeve and the cone liner plate out of the support sleeve to replace the cone liner plate and the moving cone liner plate, which greatly simplifies the work process of liner plate replacement, and the replacement cost is lower and more convenient.

One machine for multiple purposes flexible conversion (various cavity types are easy to replace)

Each model of HP series cone crusher corresponds to a variety of cavity types. The replacement of the cavity type can be achieved only by replacing the corresponding lining plate, belt pulley, auxiliary ring and other parts. The crushing cavity type can be arbitrarily changed from the standard coarse crushing to the short end ultra-fine cavity type, and the product grading can be adjusted by adjusting the speed of the transmission shaft, so as to achieve greater value of the equipment and a wide range of adaptability.

Safety intelligence (PLC automatic control)

HP cone breaking control system adopts hydraulic lubrication and electric centralized automatic control, which can realize automatic pressure supplement, multi-mode operation, overload protection, iron passing protection, discharge port adjustment, synchronous cavity cleaning and other functions, and can monitor oil temperature, oil pressure, flow, load, discharge port size and other parameters in real time, so that the equipment can operate more safely and operate more easily.